PA65ALD Kit Includes the compressor, valve assembly with pressure relief valve.

• 1/2 HP compressor, 4.5 cfm, 3.6 amps, aerates up to 50' deep
• Typical operation cost of $0.86 per 24 hours at .09¢ per kWh, actual cost may vary

Additional Information:

• Horsepower: 1/2 HP
• Voltage: 115v
• Amps: 3.6/1.8 amps (at 10' operating depth)
• Maximum Air Flow (CFM): 4.5 cfm
• Maximum Depth: 50'
• Warranty: 2 Year on Compressor

• Includes large lid O-ring for filter and two O-rings for hose barbs

Use these high volume air filters as replacements on our Gast blowers or any application requiring high volumes of prefiltered air.

• Flange prevents water from seeping through concrete
• Schedule 80 PVC for maximum durability
• Available in 1-1/2" to 8" sizes
• Also available in 1" brass style with male threaded ends for mounting bronze electrical junction box

Additional Information:

• 1-1/2" PVC flange - Overall Height 7-1/2"
• 2" PVC flange - Overall Height 8"
• 3" PVC flange - Overall Height 10"
• 4" PVC flange - Overall Height 12"
• 6" PVC flange - Overall Height 14"
• 8" PVC flange - Overall Height 20"

EasyPro EXP Self-Priming High Head External Pumps are an excellent blend of power, energy efficiency and durability. Designed with longevity in mind, these rugged units feature corrosion and abrasion resistant components, stainless steel shaft seal, integrated strainer basket and self-priming convenience!

• Quiet operation – motor is completely enclosed and fan-cooled for durability
• Designed for continuous operation
• Long life, corrosion resistant stainless steel
• Dual voltage motor with 8′ power cord.
• Pumps are shipped 115v but can easily be field changed to 230v
• 2″ Union fittings are included
• TEFC motors can be used outdoors without extra protection
• Three year limited warranty
• Made in the USA

Additional Information

• Max. Flow Rate: 6660 gph
• Max. Watts: 980
• Max. Amps (230v): 4.22
• GPM @ 10' of Head: 104
• GPM @ 20' of Head: 90
• GPM @ 30' of Head: 76
• GPM @ 40' of Head: 57
• GPM @ 50' of Head: 25
• Max. Head: 54'
• Ship Weight: 63 lbs

EasyPro EXP Self-Priming Low Head External Pumps are an excellent blend of power, energy efficiency and durability. Designed with longevity in mind, these rugged units feature corrosion and abrasion resistant components, stainless steel shaft seal, integrated strainer basket and self-priming convenience!

• Quiet operation – motor is completely enclosed and fan-cooled for durability
• Designed for continuous operation
• Long life, corrosion resistant stainless steel
• Dual voltage motor with 8′ power cord.
• Pumps are shipped 115v but can easily be field changed to 230v
• 2″ Union fittings are included
• TEFC motors can be used outdoors without extra protection
• Three year limited warranty
• Made in the USA

Additional Information:

• Max. Flow Rate: 4260 gph
• Max. Watts: 195
• Max. Amps: (115v)1.96
• GPM @ 5' of Head: 59
• GPM @ 10' of Head: 44
• GPM @ 15' of Head: 27
• Max. Head: 17'
• Ship Weight: 53 lbs

• Pump pays for itself with reduced energy costs
• Easy to use digital keypad allows for single programming
• Not self priming, use with check valve or flooded suction
• No power cord – set up to be hard wired
• Large suction strainer
• Safety rated for pool use
• Totally enclosed fan cooled motors, no weather protection needed
• 230 volt single phase power input
• Two year warranty
• Free Unions Included!
• Amp draws vary depending on RPM and operating conditions

Additional Information:

• Max Flow Rate: 9600 gph
• Inlet: 2"
• Outlet: 2"
• Amps (at 230 volt input): 11.1 max
• Maximum Head: 87'
• Warranty: 2 years
• Weight: 55 lbs

• Pump pays for itself with reduced energy costs
• Easy to use digital keypad allows for single programming
• Not self priming, use with check valve or flooded suction
• No power cord – set up to be hard wired
• Large suction strainer
• Safety rated for pool use
• Totally enclosed fan cooled motors, no weather protection needed
• 230 volt single phase power input
• Two year warranty
• Free Unions Included!
• Amp draws vary depending on RPM and operating conditions

Additional Information:

• Max Flow Rate: 8400 gph
• Inlet: 2"
• Outlet: 2"
• Amps (at 230 volt input): 6.8 max
• Maximum Head: 68'
• Warranty: 2 years
• Weight: 28 lbs