Creates a flexible, water-tight seal between liner and substrate behind liner
Can be used with any EPDM rubber liner
10 oz. tube provides approx. 10 lineal foot @ 3/8″ bead coverage

Provides a reliable water tight seal between liner and pipe. Can be used with any EPDM rubber liner.

Can be cut to fit pipes from 1″ to 6 7/8″ O.D. Taped flange bonds to liner and stainless clamp tightens around pipe.

• Can be cut to fit pipes from 1″ to 6 7/8″ O.D.
• Taped flange bonds to liner
• Stainless clamp to tighten around pipe

• Used along the outer edge of a liner seam to prevent water from getting between liner panels.
• Can be used with any EPDM rubber liner
• 11 oz. tube provides approx. 20 lineal feet @ 1/4″ bead coverage.

Helps to prevent uplifting or floating of pond liners caused by methane gasses in organic soils or high water tables

• Provides a strong, secure channel for ground water and gasses to freely flow through to designated exits (GE4EO end outlets)
• Prefabricated 6" strip consisting of a molded grid wrapped in geotextile fabric to permit a high flow of water into the molded grid while restraining soil particles
• Easy to install ­— no heavy equipment or skilled labor needed — Simply roll out in the deepest portion of your pond
• Comes in 150' long rolls, is 6" wide and 1" tall
• No minimum order!

This nontoxic two part epoxy sealer is designed specifically for sealing concrete, steel, wood, fiberglass, etc. With pond shield you get all the water proofing of a liner without the wrinkles. Each kit covers approximately 60 square feet of surface area!

• Easy To Apply — No special equipment needed, just brush or roll on
• Flexible — remains flexible from -78º to 140ºF
• Durable — Bonds to substrate rather than covering it, leading to longer life and less repairs/maintenance
• Beautiful — Provides a smooth, hard finish with no wrinkles or folds — also makes surface easier to clean in the future

Additional Information:

• 1.5 quart kits are easy to ship. Can be special ordered in larger containers but due to hardening time smaller 1.5 quart batches are recommended
• Safe for fish and plants. Easy application
• Very low maintenance after installation
• Kit yields 60 square feet at 10 mils thickness on a smooth surface

This nontoxic two part epoxy sealer is designed specifically for sealing concrete, steel, wood, fiberglass, etc. With pond shield you get all the water proofing of a liner without the wrinkles. Each kit covers approximately 60 square feet of surface area!

• Easy To Apply — No special equipment needed, just brush or roll on
• Flexible — remains flexible from -78º to 140ºF
• Durable — Bonds to substrate rather than covering it, leading to longer life and less repairs/maintenance
• Beautiful — Provides a smooth, hard finish with no wrinkles or folds — also makes surface easier to clean in the future

Additional Information:

• 1.5 quart kits are easy to ship. Can be special ordered in larger containers but due to hardening time smaller 1.5 quart batches are recommended
• Safe for fish and plants. Easy application
• Very low maintenance after installation
• Kit yields 60 square feet at 10 mils thickness on a smooth surface

This nontoxic two part epoxy sealer is designed specifically for sealing concrete, steel, wood, fiberglass, etc. With pond shield you get all the water proofing of a liner without the wrinkles. Each kit covers approximately 60 square feet of surface area!

• Easy To Apply — No special equipment needed, just brush or roll on
• Flexible — remains flexible from -78º to 140ºF
• Durable — Bonds to substrate rather than covering it, leading to longer life and less repairs/maintenance
• Beautiful — Provides a smooth, hard finish with no wrinkles or folds — also makes surface easier to clean in the future

Additional Information:

• 1.5 quart kits are easy to ship. Can be special ordered in larger containers but due to hardening time smaller 1.5 quart batches are recommended
• Safe for fish and plants. Easy application
• Very low maintenance after installation
• Kit yields 60 square feet at 10 mils thickness on a smooth surface

This nontoxic two part epoxy sealer is designed specifically for sealing concrete, steel, wood, fiberglass, etc. With pond shield you get all the water proofing of a liner without the wrinkles. Each kit covers approximately 60 square feet of surface area!

• Easy To Apply — No special equipment needed, just brush or roll on
• Flexible — remains flexible from -78º to 140ºF
• Durable — Bonds to substrate rather than covering it, leading to longer life and less repairs/maintenance
• Beautiful — Provides a smooth, hard finish with no wrinkles or folds — also makes surface easier to clean in the future

Additional Information:

• 1.5 quart kits are easy to ship. Can be special ordered in larger containers but due to hardening time smaller 1.5 quart batches are recommended
• Safe for fish and plants. Easy application
• Very low maintenance after installation
• Kit yields 60 square feet at 10 mils thickness on a smooth surface

• Use these 1½" vents to release air or water trapped under pond liners.
• Includes 1½" bulkhead fitting and pressure relief fitting.
• Keeps liners from floating up when air (or water) gets trapped underneath